|
P230
P230 Manual
Board with protection grade IP20 that allows the acquisition of 2
non-opto-isolated encoder signals via 9-pin D-shell connectors.
The third D-shell connector is used like encoder input or probe input.
The transmission to the numerical control is through an Enet-X
FieldBus via 12-pole terminal block.
|
General characteristics |
| Supply (V) |
24V dc ± 15% |
| Absorption |
450 mA |
| Fixing |
Din Guide |
| Connection |
Extractable screw connectors |
| N. diagnostic
leds / colour |
13 / 1 green, 11 red, 1 yellow |
| Bus |
ENET-X |
| N. encoders |
3 incrementals |
| Input type |
Line driver, push-pull, open collector |
| Vout encoder |
12V ± 5% |
| Encoder/Probe Absorption |
max. 150 mA |
| Encoder input frequency |
max. 150kHz |
| Weight |
170gr. |
| Relative
humidity |
max. 95%, without condensate |
|
